德国 光纤激光器 原理
PRECITEC
-BA YK52 - E
4.3 Fastening of the Connector Head
The Cutting Head YK52 has to be electrical-ly insulated against the plant. Therefore theinsulating layer at the adapter may not bedamaged.
To guarantee the working order of the sen-soric it is necessary to install the insulatingring and the insulating washers.
Fastening
The Cutting Head YK52 can be fastened by direct flan-ging of the connector head. The fastening dimensionsand the measures concerning the centring of the headcan be taken from Fig. 4.12.
Fig. 4.12: Connector Head AK YK 52
Screwing on
As transitional element, install the connecting adapterto the adapter of the connector head with the deliveredscrews. The cutting head then can be screwed ontothe beam guiding tube or on the collimator. The dimen-sions of the internal thread can be taken from table 1.Put the enclosed insulator discs under the screwheads.
Fig. 4.13: Adapter AA YK52 for collimator
Order-no.
InternalthreadM54x1M58x0,5M58x1
Fittingcollimator*
P0587-330-00001P0587-315-00001P0587-310-00001
RSY-KM-B120/1RSY-KM-B120 HPWg/2RSY-KM-B200 HPWg/2RSY-KM-B200 HPWq/2
Table 1: Overview of the connecting adapters
AA YK52 KO Rofin Sinar
Fig. 4.14: Locking ring AA YK52-LD30
18
